Universal polymer PU-22

The two-component polymer mixture consists of two components: polyurethane resin and hardener, which must be mixed using a vacuum mixer. PU-22 polymer is mixed with the HU-22 hardener in our recommended proportions. After mixing, the resin can be worked for up to 30 minutes. Curing time is 3–4 hours if an oven (40°C) is used, or 12 hours without it. Full curing takes 24 hours after mixing the resin with the hardener. If resins intended for heat transfer onto textiles are used, curing must take place at room temperature. This is due to the properties of the heat transfer film. To fill an A4 format (medium-sized stickers) about 50 g of polymer is needed. UZLEX two-component polymer mixture can be applied to almost all surfaces. The most common uses are sticker production, lettering, graphics in advertising, souvenirs, jewellery, design and room decoration, equipment making, etc. Thanks to its high temperature resistance, graphics made on a material can also be heat-transferred onto fabrics.